Verilink DIDCSU 2912 Manual page 28

DIDCSU 2912 Quick Set-Up
Figure 2-13 Circuit Manager Menu (With First Circuit Added)
Circuit Manager -- [1,1] NCM 2000 Firmware 4.33 -- Circuit Manager -- [1,1] NCM 2000 Firmware 4.33 --
Circuit Manager -- [1,1] NCM 2000 Firmware 4.33 -- Circuit Manager -- [1,1] NCM 2000 Firmware 4.33 --
Page : 1 Page : 1
Page : 1 Page : 1
Total: 1 circuits Total: 1 circuits
Total: 1 circuits Total: 1 circuits
Name Name Name Name Type Mode Type Mode Type Mode Type Mode
------------ ---- ---- ------------ ---- ---- ------------ ---- ---- ------------ ---- ----
Circuit1 Circuit1 Circuit1 Circuit1 perm 64k perm 64k perm 64k perm 64k
A) add circuit A) add circuit A) add circuit A) add circuit
D) delete circuit D) delete circuit D) delete circuit D) delete circuit
P) prev page P) prev page P) prev page P) prev page
N) next page N) next page N) next page N) next page
X) exit to craft main menu X) exit to craft main menu
X) exit to craft main menu X) exit to craft main menu
A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 >
A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 >
Second Circuit
2-10
5. Type "SP", then at the prompt use "1,2", to specify the shelf
and slot address for the source port. When you've entered the
address, at the next prompt select "1" for Net Port 1.
6. Type "DP", then at the prompt, specify the shelf and slot
address for the destination port. Use "1,2". At the next prompt
select "3" for Data Port 1.
7. Type "SM", and respond "N" if you are asked whether this is an
unframed T1 circuit. Type "1- - - - 24" to specify timeslots 1
through 24.
8. Type "DM". Type "1- - - - 24" to specify timeslots 1 through 24.
9. Type "U" to assign the bus. No bus is required for this circuit,
so the menu returns with the bus field set to INT.
10. Type "S" to set up the circuit. The message Successful circuit
build is displayed.
Prio Prio Prio Prio Src Port Src Port Src Port Src Port
---- ---- ---- ---- ---------------- ---------------- ---------------- ----------------
norm norm norm norm [1, 2] DIDC net1 [1, 2] DIDC net1 [1, 2] DIDC net1 [1, 2] DIDC net1
L) search circuit L) search circuit L) search circuit L) search circuit
E) edit circuit E) edit circuit E) edit circuit E) edit circuit
I) activate circuit I) activate circuit I) activate circuit I) activate circuit
R) deactivate circuit R) deactivate circuit R) deactivate circuit R) deactivate circuit
11. Type "N", then at the prompt, type "Circuit2" " " " as the name for
the next circuit (no more than 12 characters).
12. Type "P", then type "2" for normal.
13. Type "T", then at the prompt type "1" to select permanent.
14. Type "M", then at the prompt type "1" for 64K.
15. Type "SP", then at the prompt use "1,2" for the shelf/slot
address. At the next prompt type "2" for Net Port 2.
Verilink DIDCSU 2912 User Manual
Dest Port Dest Port Dest Port Dest Port Bus Bus Bus Bus
---------------- ---------------- ---------------- ---------------- --- --- --- ---
[1, 2] DIDC dat1 [1, 2] DIDC dat1 [1, 2] DIDC dat1 [1, 2] DIDC dat1 INT INT INT INT
Status Status Status Status
------ ------ ------ ------
Active Active Active Active