Building Circuits-Circuit Manager Menu - Verilink DIDCSU 2912 Manual

DIDCSU T1 Version
Figure 3-20 Display Alarm Buffer
[1,1] DIDCSU 2912 > o [1,1] DIDCSU 2912 > o
[1,1] DIDCSU 2912 > o [1,1] DIDCSU 2912 > o
DIDCSU 2912 [1,1] DIDCSU 2912 [1,1]
DIDCSU 2912 [1,1] DIDCSU 2912 [1,1]
DIDCSU 2912 [1,1] DIDCSU 2912 [1,1]
DIDCSU 2912 [1,1] DIDCSU 2912 [1,1]
Press enter to continue Press enter to continue
Press enter to continue Press enter to continue
Building Circuits—Circuit Manager Menu
3-30
AIS AIS
AIS AIS
AIS Threshold AIS Threshold
AIS Threshold AIS Threshold
When finished reviewing the alarm information, enter "X" to return
to the Main Menu.
To access the Circuit Manager Menu from the Main Menu, enter
"B".
Use the Circuit Manager Menu to build and maintain logical
connections between ports within a node. The port can be a T1 or
data port. T1 port bandwidth is set using a number of timeslots, 1-
24. The bandwidth for each DS0 is set to 56 kbit/s or 64 kbit/s.
NOTE: Each circuit must include a minimum of one network port
(circuits are not supported from data port to data port).
Figure 3-21 Circuit Connections
Data 1
Data 2
A.
B.
• The port line code selection (for example, 56 kbit/s or 64
kbit/s circuits) can limit a circuit's available bandwidth.
• Network and data ports must be In Service before being
included in a circuit.
• When you have named a circuit and identified its source and
destination ports, allocate its source and destination
timeslots.
• If a card is moved to a different slot all circuits in that card are
discarded when it powers up in a different numbered slot.
Verilink DIDCSU 2912 User Manual
Minor Alarm Minor Alarm port port
Minor Alarm Minor Alarm port port
Cleared Cleared port port
Cleared Cleared port port
A
B
Data to T1
T1 to T1
1 1 8-09-96 8-09-96 18:38:35 18:38:35
1 1 8-09-96 8-09-96 18:38:35 18:38:35
1 1 8-09-96 8-09-96 18:37:17 18:37:17
1 1 8-09-96 8-09-96 18:37:17 18:37:17
Net 1
Net 2