Display Alarm Buffers - Verilink DIDCSU 2912 Manual

Command
Rn Remote Alarm Indication (RAI) Threshold/RAI Interval: Use this option to
indicate a monitoring interval that is greater than the threshold.
In the Superframe format, an RAI consists of Bit 2 of all 24 channels set
to zero.
In ESF format, an RAI is a repeating pattern of eight ones followed by
eight zeros transmitted over the ESF Data Link.
An Alarm Indication Signal (AIS) Threshold/AIS Interval: Use this option to
indicate a monitoring interval that is greater than the threshold.
Bn Bipolar Violation (BPV) Threshold/BPV Interval: Use this option to
indicate a monitoring interval that is greater than the threshold.
En Errored Seconds (ES) 15 min. Threshold/ES 24 hr. Threshold: An ES
alarm indicates a second with one or more ESF error events.
Enter the maximum number of ES to be allowed in 15 minutes and 24
hours.
Sn Severely Errored Second (SES) 15 min. Threshold/SES 24 hr. Threshold:
Select a threshold level.
Enter the maximum number of SES to be allowed in 15 minutes and 24
hours.
In Bit Error Rate (BER) Threshold: Select a threshold level. Selecting
-9
10 (1 per billion bits) will report more errors than 10
bits).
X Exit the Net Port Alarm Threshold Configuration Menu
Display Alarm
Buffers
Description
To display the alarm buffer, enter the letter "O" in the Net Port
Alarm Menu. The Display Alarm Buffer displays all major and
minor alarms that have occurred at each port. When an alarm is
cleared, the time stamp changes to reflect the time the alarm was
cleared.
Verilink DIDCSU 2912 User Manual
DIDCSU T1 Version
Threshold:
1—86400
0 to disable
Interval:
1—86400
seconds
Threshold:
1—86400
0 to disable
Interval:
1—86400
seconds
Threshold:
1—86400
0 to disable
Interval:
1—86400
seconds
15 minute
Threshold:
1— 900
0 to disable
24 hour
Threshold:
1—86400
0 to disable
15 minute
Threshold:
1—900
0 to disable
24 hour
Threshold:
1—86400
0 to disable
1) DISABLE
-4
(1 per thousand 2) 10E-4
3) 10E-5
4) 10E-6
5) 10E-7
6) 10E-8
7) 10E-9
Options
3-29