For Chassis Service; For Middle Gear Service - Yamaha XZ550RJ 1982 Service Manual

Plastigauge set "Green"
(P/N YU-33210)
This gauge is needed when measuring clearance
for connecting rod bearing.

For chassis service

T-handle (P/N YU-01268) and damper rod holder
(P/N YM-33256)
This tool is used to loosen and tighten the fron fork
cylinder holding bolt
Front fork cap socket (19mm) (0.75 in))
(P/N YM-01298)
This tool is needed when loosening and tightening
the front fork cap bolt

For middle gear service

Universal joint holder
(P/N YM-04062)
This tool is used when adjusting gear lash, in the
middle gear.
Middle drive gear holder
(P/N YM-33222)
This tool is needed when measuring gear back lash.
Dial indicator
(P/N YU-03097)
These tools are used when measuring gear lash for
middle gear.
12