Sub Address Transmission - Kyocera ECOSYS M3540dn Operation Manual

Using Convenient Fax Functions > Sub Address Box Function
2

Sub Address Transmission

To specify a Sub Address Box when sending a fax, follow the steps below.
NOTE
To use sub address transmission, check that a sub address and password have been set in the receiving system in
advance.
Encrypted transmission cannot be used in sub address transmission.
For the setting method when the machine receives originals, refer to
1
2
3
4
Press the [▲] or [▼] key to select [Sub Address Box].
5
Press the [OK] key.
Print
1
Press the [▲] or [▼] key to select [SubAddr Box List].
2
Press the [OK] key.
3
Press [Yes] in confirmation screen. The list is printed.
Press the [FAX] key.
Place the originals.
Specifying destination.
Enter the fax number of the receiving system using the numeric keys.
NOTE
When a sub address has been registered to the destination of the Address Book, you can
use the destination. When a sub address-registered destination in the Address Book is used
for a One touch key, you can also use the One-touch key.
Sub Address Box Function on page
FAX No. Entry:
0123456789
Chain Detail
5-20
5-12.