Fax Rx Result Reports - Kyocera ECOSYS M3540dn Operation Manual

Managing Jobs > Printing Administrative Reports (Result Rpt Set.)
If [Dest. or Name] is selected, either the name (destination name) or the destination (FAX No.) stored in the address
book is shown.
If [Dest. and Name] is selected, both the name (destination name) and destination (FAX No.) are shown.
When the destination was directly entered, only the destination (FAX No.) is shown.
NOTE
This is not displayed if E-mail/Folder and Fax are both set to [Off] in Send Result Reports.
1
2

FAX RX Result Reports

Each time you receive a fax, you can print a report to confirm whether the fax was received successfully.
1
Display the screen.
1
Press the [System Menu/Counter] key.
2
Press the [▲] or [▼] key to select [Report].
3
Press the [OK] key.
4
Press the [▲] or [▼] key to select [Result Rpt Set.].
5
Press the [OK] key.
6
Press the [▲] or [▼] key to select [Send Result].
7
Press the [OK] key.
8
Press the [▲] or [▼] key to select [Dest. Info.].
9
Press the [OK] key.
Configure the function.
1
Press the [▲] or [▼] key to select [Dest. or Name] or [Dest. and Name].
2
Press the [OK] key.
NOTE
Fax receipt can also be notified by e-mail instead of checking the receipt result report.
(Refer to Reporting FAX Receipt Result by E-mail on page
Display the screen.
1
Press the [System Menu/Counter] key.
2
Press the [▲] or [▼] key to select [Report].
7-7
7-12)