Default Settings Dialog Box - Kyocera ECOSYS M3540dn Operation Manual

Sending Faxes from PC > Basic Transmission

Default Settings Dialog Box

By setting the transmission conditions that you use most in this dialog box, you can minimize the need to change the
settings each time.
The Default Settings dialog box can be accessed by the following procedure:
1
2
Display the screen.
1
Click the [Start] button on the taskbar, click
and printers].
2
Right click the name of the machine to be used as the network fax and select
preferences] from the resulting pull-down menu. Click the
[Printing Preferences] window.
Configure the settings.
(1) Sending Options Tab
Item
FAX Delayed Transmit
checkbox
[Control
Check the checkbox in order to activate the time fields to the right of the
checkbox whenever you want to set the time that your documents will be
transmitted. The desired time setting can be entered directly with the
keyboard or by clicking on the  and  arrows.
IMPORTANT
If the time that is shown in the message display of this fax
machine does not match the current time, communications
that use the timer may not be accomplished as expected. If
the displayed time is not current, be sure to adjust it to
match the correct time.
NOTE
If you designate a time that is earlier in the day than the time that
is actually displayed in the fax machine itself, the transmission
operation will be carried out the following day at that time. Be
sure to confirm the time setting in the fax machine itself before
making this setting.
Available settings: 00:00-23:59
6-10
Panel], and then click
[FAX TX Setting] button in the
Description
[View devices
[Printing