Kyocera ECOSYS M3540dn Operation Manual page 43

Sending Faxes > Basic transmission procedure
5
6
NOTE
Up to 64 digits can be entered as the fax number of the receiving system.
Pressing the [Address
dialing. For example, when dialing the receiving system on an external line, you can use this
method to insert a pause before resuming dialing after you dial a specific number.
If Dest. Entry(FAX) on page 8-7
number. Select the destination from the Address Book or the One Touch Keys.
Selecting the functions.
The following functions can be set for FAX transmission.
• Density  page 3-24
• Original Image  page 3-20
• Duplex  page 3-24
• Original Size  page 3-20

• FAX Resolution page 3-21
• File Name Entry  page 3-21
• FAX Delayed Transmission
• FAX TX Report  page 3-24

• Program page 3-28
For details, refer to Fax transmission functions on page
Send Start.
Press the [Start] key.
When scanning finishes, transmission starts.
When originals are placed in the document processor
After originals placed in the document processor are scanned and stored in the memory, the
receiving system is dialed.
When originals are placed on the glass surface
After originals placed on the glass surface are scanned and stored in the memory, the
receiving system is dialed.
Recall/Pause] key adds about three seconds of waiting time during
is set to [Prohibit], it is not possible to directly enter a fax

page 3-22
3-3
3-19.