Confirming The Registered Program; Recalling Program; Overwriting Program - Kyocera ECOSYS M3540dn Operation Manual

Sending Faxes > Program
2

Confirming the Registered Program

The settings of the registered program can be confirmed by recalling the program. Refer to
3-29.

Recalling Program

Press the one of the [Program
settings of various functions are replaced with the registered settings.
Place the originals and press the [Start] key.

Overwriting Program

You can change program. Use the procedure below to edit the program.
1
Register the program.
Press the one of the [Program
settings and hold it (2 seconds or more).
The current settings are registered to the selected program key.
I] to [Program IV] keys where the settings you want to recall are registered. The current
Configure the settings of the functions.
Set the function to change.
For the settings of functions, refer to
NOTE
In the case of the sending function and fax function, a destination is also registered in the
program.
I] to [Program IV] keys where you want to register the
Fax transmission functions on page
3-29
Recalling Program on page
3-19.