Ecm Tx - Kyocera ECOSYS M3540dn Operation Manual

Before Using the Fax Machine > Local FAX Information Entry
2

ECM TX

Set whether ECM TX is performed. ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error occurs. Fax machines that have ECM mode check for
errors as they communicate, preventing distortion of the image due to noise on the line and other conditions.
1
2
5
Press the [OK] key.
6
Press the [▲] or [▼] key to select [FAX Dialing Mode].
7
Press the [OK] key.
Set the FAX Dialing Mode.
1
Press [▲] or [▼] to select [Tone(DTMF)] or [Pulse(10pps)].
FAX Dialing Mode:
01 * Tone(DTMF)
02 Pulse(10pps)
2
Press the [OK] key.
NOTE
When there is a large amount of noise on the line, communication may take slightly longer
than when [Off] is selected.
Display the screen.
1
Press the [System Menu/Counter] key.
2
Press the [▲] or [▼] key to select [FAX].
3
Press the [OK] key.
4
Press the [▲] or [▼] key to select [Transmission].
5
Press the [OK] key.
6
Press the [▲] or [▼] key to select [ECM TX].
7
Press the [OK] key.
Configure the settings.
1
Press [▲] or [▼] to select [On] or [Off].
2
Press the [OK] key.
2-11