Kyocera ECOSYS M3540dn Operation Manual page 142

Sending Faxes from PC > Basic Transmission
4
Add the destination to the destination list.
1
Add this information to the
button.
2
To change the recipient information of a destination that has been added to the
[Destination List], select the destination to be changed and click on the [Edit] button.
Change the recipient information and click on the [OK] button.
Item
FAX Number
Company
Department
Recipient
3
When the sender information is not set in the
[Sender Information] tab and set the sender information. Refer to
Tab on page 6-12.
Item
Company
Department
Name
Telephone Number
FAX Number
E-mail Address
[Destination List] by clicking on the
The fax number cannot be changed.
A maximum of 32 characters can be entered.
A maximum of 32 characters can be entered.
A maximum of 32 characters can be entered.
[Default
A maximum of 64 characters can be entered.
A maximum of 64 characters can be entered.
A maximum of 32 characters can be entered.
A maximum of 20 characters can be entered (Entry is allowed
for the characters 0 to 9, #, *, -, (, ), +, and spaces.)
A maximum of 20 characters can be entered (Entry is allowed
for the characters 0 to 9, #, *, -, (, ), +, and spaces.)
A maximum of 128 characters can be entered.
Available characters:
Symbols ( !, #, $, %, &, ', *, +, -, ., /, =, @, [, ], ^, _, `, { and })
Alphanumerics (0 – 9, A – Z and a – z)
6-19
[Add to Destination
Description
Settings] dialog box, click on the
(4) Sender Information
Description
List]