Cancelling The Transmission - Kyocera ECOSYS M3540dn Operation Manual

Sending Faxes > Basic transmission procedure

Cancelling the Transmission

The method for cancelling communication with this machine differs depending on the transmission method (memory
transmission or direct transmission) and communication form. Methods of cancelling in various cases are explained
here.
Cancelling Memory Transmission (while originals are being scanned)
1
Cancelling Memory Transmission (during communication)
NOTE
Even if transmission is canceled, there is a possibility that pages scanned prior to cancelation were sent to the
receiving party. Check with the receiving party to see if pages were accidentally sent.
1
2
3
Press the [Stop] key.
During memory transmission, to cancel scanning while originals are being scanned, press the
[Stop] key on the operation panel.
Scanning of originals is canceled, and the originals are ejected. When originals remain in the
document processor, take them out from the original eject table.
Press the [Stop] key.
Display the cancel send job list screen.
1
Press the [▲] or [▼] key to select [Cancel Send Job].
2
Press the [OK] key.
Display the cancel send job list screen.
Canceling Transmission.
1
Press the [▲] or [▼] key to select the job to cancel.
Cancel Send Job:
0008 abcd@efg.co
0009 hijk@lmn.co
0010 0123456789
Resume Menu
2
Press [Menu].
3
Press the [▲] or [▼] key to select [Cancel Job].
4
Press the [OK] key.
5
Press [Yes] in the confirmation screen. The selected job is deleted.
3-9