Duplex; Fax Tx Resolution; Density - Kyocera TASKalfa 306ci Operation Manual

Sending Faxes > Duplex

Duplex

Select the type and orientation of the binding based on the original.
Item
1-sided
2-sided
Others

Duplex

Original
Orientation
* Displayed when [2-sided (Binding Left/Right)] or [2-sided (Binding Top)] is selected in "Duplex".

FAX TX Resolution

Select fineness of images when sending FAX. The larger the number, the better the image resolution. However, better
resolution also means larger file sizes and longer send times.
Item
400 × 400 dpi Ultra
200 × 400 dpi Super
200 × 200 dpi Fine
200 × 100 dpi Normal
NOTE
The default setting is [200 × 100 dpi Normal]. The higher the resolution, the clearer the image, but the fax
transmission time is longer.

Density

Adjust density.
Adjust density selecting [-4] (Lighter) to [+4] (Darker).
Value
―
―
1-sided,
2-sided (Binding Left/Right),
2-sided (Binding Top)
Top Edge on Top,
*
Top Edge on Left
when sending originals with minute characters
and lines more finely
when sending originals with minute characters
and lines
when sending originals
with relatively small characters and thin lines
when sending originals with standard size
characters
Disables the function.
Set when using a 2-sided sheet original that will be bound on
the left or right.
Select the binding orientation of originals.
Select the orientation of the original document top edge to
scan correct direction.
Description
3-17
Description
Typical character size: 6 point
(example: )
Resolution Resolution
Typical character size: 6 point
(example: )
Resolution Resolution
Typical character size: 8 point
(example:
Resolution Resolution
Typical character size: 10.5 point
Resolution Resolution
(example:
)
)