Fax Tx Resolution; Density; Original Image; Continuous Scan - Kyocera ECOSYS M3540idn Operation Manual

Sending Faxes > FAX TX Resolution

FAX TX Resolution

Select fineness of images when sending FAX. The larger the number, the better the image resolution. However, better
resolution also means larger file sizes and longer send times.
Item
400 × 400 dpi Ultra (Ultra Fine)
200 × 400 dpi Super (Super Fine)
200 × 200 dpi Fine
200 × 100 dpi Normal
NOTE
The default setting is 200 × 100 dpi (Normal). The higher the resolution, the clearer the image, but the fax
transmission time is longer.

Density

Adjust the density.
NOTE
When you want to increase the density of the original that has thin density, density needs to be adjusted to Darker.
When you want to reduce the density of the original that has thick density, density needs to be adjusted to Lighter.

Original Image

Select original image type for best results.
Item
Text+Photo
Photo
Text
Light Text/Line
Text (for OCR)

Continuous Scan

Scan a large number of originals in separate batches and then produce as one job. Originals will be scanned
continuously until you press [Finish Scan].
when sending originals with minute characters
and lines more finely
when sending originals with minute characters
and lines
when sending originals
with relatively small characters and thin lines
when sending originals with standard size
characters
Best for mixed text and photo documents.
Best for photos taken with a camera.
Best for documents that are mostly text
Clearly reproduces faint characters written in pencil, etc., and thin lines on map originals or
diagrams.
Scanning produces an image that is suitable for OCR.
3-20
Description
Typical character size: 6 point
(example:
Resolution Resolution
Typical character size: 6 point
(example:
Resolution Resolution
Typical character size: 8 point
(example:
Resolution Resolution
Typical character size: 10.5 point
Resolution Resolution
(example:
Description
)
)
)
)