Cisco Unity Installation Manual page 78

Installing Unity and
ActiveFax
Continued
70
UNITY INSTALLATION GUIDE
If you are installing ActiveFax, the account used for installation
on the Unity server must be the account that Exchange on the
Unity server starts with. By default, this is the account that
Exchange was installed with.
Unity and ActiveFax installation
To uninstall any existing fax gateways
Other Exchange fax gateways conflict with ActiveFax. Before you
install or upgrade ActiveFax, uninstall any existing fax gateways.
a Refer to your fax server documentation for instructions on
uninstalling fax gateways.
b After you remove the gateways, allow time for their removal
to be replicated throughout the site.
To confirm that the Windows NT/2000 date and time
formats are correct
Before you install Unity and ActiveFax, confirm that the Win-
dows NT/2000 date and time formats are correct. If you change
the formats after you install Unity and ActiveFax, fax reports will
fail.
a On the Windows Start menu, click Settings > Control Panel.
b Double-click the Regional Settings icon.
c Confirm that the format settings on the Date and Time tabs
are correct.
d Click "OK" to close the Regional Settings Properties dialog
box.
To install ActiveFax on a separate server
Install ActiveFax first. When you install the Unity software on
the Unity server, you are prompted to specify the name of the
server on which ActiveFax is installed. The Unity Setup program
then verifies that ActiveFax is running on that server.
a Confirm that the ActiveFax system key is connected to the
ActiveFax server.