Task List: Unified Messaging, One Exchange Server - Cisco Unity Installation Manual

Task list:
Unified
messaging,
one Exchange
server
20
UNITY INSTALLATION GUIDE
Turnkey system,
Unity server is a Windows NT PDC
1 Review the installer's checklist. See page 28.
2 Export information from Repartee or Replay Plus. See
page 31.
3 Install or reseat voice and fax boards. See page 33.
4 Set up the Unity server. See page 40.
5 Start the Unity server and log on to Windows NT. See
page 44.
6 Change passwords. See page 45.
7 Assign a static IP address (only if there is no DHCP server
on the network). See page 47.
8 Confirm that the Unity server is getting an IP address. See
page 54.
9 Set up fax ports for ActiveFax. See page 75.
10 Create an Outlook user profile. See page 80.
11 Create an emergency repair disk. See page 82.
12 Configure Unity to work with the phone system. See
page 86.
13 Program the phone system. See page 90.
14 Test the integration. See page 92.