Cisco Unity Installation Manual page 115

g Click "Next," and Setup examines your system to confirm
that the required software is installed and configured prop-
erly and that a system key is installed.
If an error message appears, correct the specified problem,
then rerun Setup.
h Follow the on-screen prompts.
i When you are prompted to select the features you want to
install, select the "Install fax server" check box. (If the check
box is not available, the system key does not include the
option to install ActiveFax.)
If the ActiveFax server contains NMS fax boards, also select
the "Install voice board software" check box.
j Follow the on-screen prompts to complete the installation.
k Restart the ActiveFax server.
To remove ActiveFax from the Unity server
Do this procedure if you are moving ActiveFax from the Unity
server to a separate server.
a On the Windows Start menu, click Settings > Control Panel.
b Double-click "Add/remove programs."
c Remove the following programs in the order listed:
LightningFAX 6.5 - LFExGateway
LightningFAX 6.5 - FAXTOMAIL (if it is installed)
LightningFAX 6.5 - CLIENT
LightningFAX 6.5 - RASTERIZATION SERVER
LightningFAX 6.5 - DRIVER
LightningFAX 6.5 - SERVER
LightningFAX 6.5 - USYNC
LightningFAX 6.5 - ACTIVEX CONTROLS
d Close the Add/Remove Programs dialog box.
CHAPTER 5: Upgrading hardware and software
Continued
107