Testing The Integration - Cisco Unity Installation Manual

Testing the
integration
DO THIS SECTION?
TURNKEY
SYSTEM
All configurations
COMPONENT
SYSTEM
All configurations
92
UNITY INSTALLATION GUIDE
In this section, you test whether Unity and the phone system are
integrated correctly.
Unity comes with a test subscriber, Example Subscriber. First,
you assign an extension to Example Subscriber so that you can
leave a message. Then, you use Example Subscriber to test the
integration.
YES NO
see
To assign an extension to the test subscriber
page
This procedure sets call transfer options only for Example Sub-
scriber. Call transfer options for actual subscribers are set later,
and are described in the Unity System Administration Guide.
a In the Unity Administrator, go to Subscribers >
Subscribers > Profile.
b If Example Subscriber is not displayed, click the Find icon,
then click "Find," and select "Example Subscriber" in the
list that appears.
c In the "Extension" box, type the extension for Example Sub-
scriber. This extension should be near your work area, so
you can hear it ring.
d Click the Save icon.
e
c
d b