Table of Contents
Advertisement
Hardware settings
Do the following procedure as you install fax boards.
To set the rotary switch
The rotary switch setting identifies the fax board and specifies
which fax ports are on which board.
The CPi/200 PCI board contains two fax ports. Depending on the
configuration of the Unity server, you can install up to four
CPi/200 PCI boards.
Set the rotary switch on each board as shown below.
First board
Second board
Third board
Fourth board
LED status indicators
There are two LED status indicators for each fax port. The fol-
lowing table describes the meaning of the status indicators.
Color
Lit
Green
Port is off hook
Amber
Board is
operational
APPPENDIX A: Voice and fax boards
Switch
4
4
4
4
Unlit
Port is on hook
Board is not
operational
Blinking
---
Board configuration
problem
147
Advertisement
Table of Contents
