Unity Configurations - Cisco Unity Installation Manual

Unity
configurations
10
UNITY INSTALLATION GUIDE
There are four ways to install Unity. The following lists describe
the characteristics of each type of configuration.
Voice mail only
The Unity server handles only voice messages.
The Unity server is not connected to the network.
Subscribers check messages only by phone.
Unity administration must be performed at the Unity server.
Subscribers do not have access to the Unity ActiveAssistant.
Voice-mail and e-mail attributes, if any, on subscriber
accounts must be administered separately.
Voice mail with LAN administration
The Unity server can handle voice and fax messages.
The Unity server is connected to the network, so it has
access to network utilities, such as virus checking and
backup.
Subscribers check messages only by phone.
Unity administration may be performed over the network.
Subscribers have access to the Unity ActiveAssistant.
Voice-mail and e-mail attributes, if any, on subscriber
accounts must be administered separately.
ActiveFax may be installed on the Unity server or on a sepa-
rate server.