Adding Or Removing Languages - Cisco Unity Installation Manual

Adding or
removing
languages
The Unity installation discs include all of the files for all of the
languages in which Unity is available. You can install as many
languages as you want. The Unity system key specifies how
many of these languages can be available at one time.
If you want to use more languages than are currently allowed by
your system key, contact your Unity dealer about upgrading the
key.
CAUTION: You must use the compact discs for the version of
Unity currently installed to add or remove languages. If the discs
are for a different version, you must do a full upgrade by using the
procedures under "Upgrading a Unity or ActiveFax server," on
page 100.
For more information on languages, see "Setting up multiple lan-
guages," in Chapter 6 of the Unity System Administration Guide.
To add or remove languages
a Shut down Unity if it is running.
b Log on to Windows NT/2000 by using the domain adminis-
trator account.
c Insert Unity compact disc 1 in the CD-ROM drive.
d Browse to the root directory of the Unity compact disc, and
run Setup.exe.
e Follow the on-screen prompts.
f When you are prompted to select the features you want to
install, select only the "Upgrade Unity" check box.
g Follow the on-screen prompts.
h When you are prompted to select languages, select check
boxes for the languages that you want to install and clear
check boxes for the languages that you want to remove.
i Follow the on-screen prompts to complete the installation.
j Restart the Unity server.
CHAPTER 5: Upgrading hardware and software
111