Starting Copy Center; Address Settings - Epson SureColor T-Series User Manual

Surecolor t-series
Hide thumbs Also See for SureColor T-Series:
Table of Contents

Advertisement

Epson SureColor T-Series User's Guide
Calibration
Feed Adjust
*1
Available only when the optional hard disk unit or
Adobe PostScript 3 Expansion Unit has been
installed.
*2
In the case of Scan To e-mail and Scan To Shared
Folder as well, all scanned image files are saved to
the hard disk of the printer.
*3
Printing is limited to JPEG files saved at a directly
printable resolution.

Starting Copy Center

Copy Center is included on the network interface of
the printer, and it functions when the Multifunction
Scanner is connected to the printer.
The following procedure describes how to start Copy
Center.
Start a web browser on a tablet terminal or
1
computer connected to the printer via the
network.
Enter the IP address specified on the printer in
2
the address bar, and then press the Enter key or
the return key.
In the displayed screen, click Copy Center.
3
The printer does not have a wireless LAN function. To
connect the printer and a tablet terminal over the
network, you need a wireless LAN router or wireless
LAN access point.
Copying and Scanning
Control
Copy
panel
Center
-
-
Example
For supported operating systems and browsers, see the
following section.
U"System Requirements" on page 200

Address Settings

To scan to e-mail or scan to a shared folder, you must
configure the mail server and register the e-mail
destination address and shared folder address in
advance.
Important:
c
If you use the Scan to e-mail or Scan to Shared
folder functions or manage in CopyCenter
without configuring the security settings,
problems may occur, including the interception or
falsification of information.
We recommend that before you use the product,
you sufficiently understand the problems that can
occur during operation without configuring
security settings, and then configure the security
settings at your own discretion and responsibility.
Mail Server Settings
Use Remote Manager to configure the mail server
settings (SMTP/POP3). As with Copy Center, Remote
Manager is included in the network interface of this
printer.
72
LAN

Advertisement

Table of Contents
loading

Table of Contents