Epson SureColor T series Start Here

Epson SureColor
®
Start Here
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
Choose a Location for the Printer
Choose a location for the printer that is near a wall outlet where the power cord
can be easily unplugged. Avoid places subject to rapid changes in temperature
and humidity. Also keep the printer away from direct sunlight, strong light, or
heat sources.
Make sure to place the printer on a level surface capable of supporting the
weights indicated below and with enough space on all sides (see illustration
below).
5.9 in. (150 mm)
23.6 in.
(600 mm)
SureColor T3470: 141 lbs (64 kg)
SureColor T5470: 167.5 lbs (76 kg)
Unpack and Place Printer
1
Make sure you have these items:
Printer
Printer and roll spindle Ink cartridges (4)
Stand
Stand (assembled)
Note: To assemble the stand, see the instructions included with the stand
packaging.
WARNING: The SureColor T3470 printer requires two people to lift and move
it (three people for the SureColor T5470).
T3470/T5470
®
5.9 in.
(150 mm)
Power cord Limited warranty
Bolts (4)
Paper basket
Basket rods
2
Remove the protective plastic from the outside of the printer.
3
If you are installing the printer on the stand, lock the front casters by
pushing the tabs down.
4
Lift and place the printer on the stand. Make sure to grip the printer as
shown in the illustrations.
SureColor T3470
SureColor T5470
5
Secure the printer to the stand using the supplied bolts.