Menu Descriptions; Print Queues Menu - Epson SureColor T-Series User Manual

Epson SureColor T-Series User's Guide

Menu Descriptions

Print Queues menu

When the printer printed without using the printer driver included with the printer or the PS driver included with
the optional Adobe PostScript 3 Expansion Unit, the job names and estimated times in the following table may not
be displayed correctly.
*1. T7270D/T5270D only
*2. T7270/T5270/T3270 only
*3. When the optional hard disk unit or Adobe PostScript 3 Expansion Unit has been connected only
*4. When the optional Adobe PostScript 3 Expansion Unit has been connected only
Item
*3
Print Queue XXXXXXXXXXX (name of
waiting print job)
*2, *3
Held Queue View Hold
Queue
Resume All Jobs
Using the Control Panel Menu
Description
Waiting Job Name
User
Estimated Start
Time
Estimated Print
Time
Printing
Availability
XXXXXXXX Paused Job Name
XXX (name
User
of held job)
Paper Type
Source
Size
Reason For Hold
Press the Z button to resume all held jobs currently in the queue.
132
Lists the estimated start time and time needed to
print the selected job.
It also predicts whether the job can be completed
without replacing paper, ink or the Ink
Maintenance Tank. The estimates are guidelines
only. We recommend proceeding even if Can Not
Complete is displayed.
Remote Manager and the LFP HDD Utility display
the reason for the Can Not Complete message
and allow you to hold or cancel the job.
U"Function Summary" on page 67
Printing availability by paper remaining cannot
be performed correctly if Roll Paper Remaining
is Off.
The printer will not predict availability on the
basis of the amount of ink remaining when
documents are printed using LFP Print Plug-In for
Office or EPSON CopyFactory5.
When the printer printed using the PS driver
included with the optional Adobe PostScript 3
Expansion Unit, Estimated Start Time and
Estimated Print Time are displayed as "0
minutes".
This option is available only if On is selected for
Store Held Job in the Setup menu,
Displays the print settings for held jobs and the
reason the job is held.
Jobs that are held because the job print settings
differ from those currently selected for the printer
can be printed as described below.
(1) Replace the paper and take whatever other
steps may be necessary to ready the device for
printing.
(2) Select Resume All Jobs.