Epson SureColor T-Series User Manual page 146

Epson SureColor T-Series User's Guide
Item
Rotate
Using the Control Panel Menu
Description
Clip By Margins Depending on the Output Size setting, adds the value selected for
Margin (area of
of the PS command of the data or the size selected for Output Size (area
of
margin section, it is clipped and not printed.
*
0° You can rotate the coordinates of the drawn data counterclockwise in
units of 90° before printing. Note that objects drawn by RTL are not
90°
rotated.
180° When both this setting and the RO command specify rotation, rotation is
performed using the combined amount of both values. Note that
270°
rotation by the RO command is for objects only (the arrow section in the
following illustration), and rotation is not performed for the drawn area
(the square section in the following illustration). As a result, objects in a
section that protrude from the drawn area are not printed.
in the following illustration) inside the hard clip area
in the following illustration). When there is a print object in the
146