Epson SureColor T-Series User Manual page 152

Epson SureColor T-Series User's Guide
Item
Operational Network Setup
Control
Power Cleaning
*3
Manage HDD Format Hard Disk
Printer Mode Auto
PostScript
HP-GL/2
Date And Time
Time Zone
*4
Reset PS Settings
Reset All Settings
Using the Control Panel Menu
Description
Password Required
No Password Required
Inspect the printed pattern and select the check boxes for patterns with faint or
missing areas. To select all nozzles, place a check in the box on the left.
Yes
No
*
Normally, leave the setting at Auto. Sent print data is identified, and the
operation mode is switched automatically. If operation mode switching is not
*4
performed correctly, and printing is not performed correctly, set to the operation
mode to be used.
MM/DD/YY HH:MM
Enter the difference between the current time zone and GMT.
The selected time zone is used in e-mail notifications sent by Remote Manager
when an error occurs and so on.
Yes
No
Yes
No
Choose whether the administrator password is
required to access Network Setup from the
*
control panel or Remote Manager.
If Yes is selected, an optional hard disk unit or
Adobe PostScript 3 Expansion Unit that is
connected to the printer is formatted.
Formatting the hard disk unit or Adobe PostScript
3 Expansion Unit deletes all stored print jobs.
Hard disk units or Adobe PostScript 3 Expansion
Units that have been used with other printers
must be formatted before they can be used with
this printer.
Set the printer's built-in clock. The time provided
by the clock is used when printing logs and status
sheets.
Select Yes to initialize the user font and user ICC
profile saved in the user area of the Adobe
PostScript 3 Expansion Unit. Initialization deletes
saved data.
Select Yes to restore defaults for all settings
except the Date And Time, Language, and Unit:
Length options in the Setup menu.
152