Replacing Paper - Epson SureColor T-Series User Manual

Epson SureColor T-Series User's Guide
displays the results, preventing waste caused the
paper running out part way through a print job.
This allows you to choose whether to print on the
existing roll or replace the paper, preventing waste.
The T7270/T5270/T3270 can predict availability
only when the optional hard disk unit or Adobe
PostScript 3 Expansion Unit has been installed.
U"Saving to and Reprinting on the Optional
Hard Disk Unit" on page 67
If paper has run out, the T7270D/T5270D can
switch to Roll 1 or Roll 2 automatically based on
predicted availability and continue printing.
U"Switching to Roll 1/Roll 2 by Roll Length" on
page 90
Basic Operations

Replacing Paper

This section describes how to replace paper. The
process for removing the current paper differs with the
type of paper loaded; follow the instructions displayed
in the control panel.
Buttons that are used in the following settings
Confirm that the printer is ready and press the
1
( button.
The Load/Remove Paper menu will be
displayed.
Press the d/u buttons to select the type of paper
2
used to replace the current paper, and then press
the Z button.
The printer will eject the current paper.
3
The process for ejecting the paper varies with
the type of paper loaded, as described below.
If On is selected for Roll Paper Remaining
Barcode printing will begin; when printing is
complete, the roll will rewind automatically.
If Off is selected for Roll Paper Remaining
The roll rewinds automatically.
Note:
When the display shows Turn roll paper adapter
to wind up roll paper, open the roll paper cover
and rewind the paper by hand.
44