Screen View - Epson SureColor T-Series User Manual

Epson SureColor T-Series User Guide
I Zbutton
Displays the menu for the tab currently selected in
O
the display.
U"Using the Control Panel Menu" on page 125
When menus are displayed and an item is
O
highlighted, pressing this button displays the
sub-menu for the highlighted item.
If pressed while a parameter is selected from the
O
Menu, the parameter is set or executed.
J
button (Help button)
Except when printing is in progress, pressing this
button displays the Help menu. Highlight an item and
press the Z button to view help for the highlighted
item.
K "button (Maintenance button)
Displays the Maintenance menu, which is used for
nozzle checks and head cleaning.
U"Adjusting the Print Head" on page 156
L Wbutton (pause/cancel button)
The printer enters pause status if this is pressed
O
while printing. To release the pause status, press
the W button again, or select Pause Cancel on
the screen and then press the Z button. To
cancel print jobs being processed, select Job
Cancel on the screen and then press the Z
button.
Pressing this button while a menu or help is
O
displayed closes the menu or help and returns the
printer to ready status.
Introduction
M )button (Feed/Cut Media button)
This button is used with roll paper only. If the
O
printer is loaded with cut sheets or poster board,
pressing this button will have no effect.
It is used to manually cut roll paper using the
O
built-in cutter.
U"Manual cut method" on page 33
If printing is not currently in progress and the
O
printer is loaded with roll paper, you can feed
paper ahead by pressing first this button and then
the d button. Press the u button to rewind. Keep
the d button pressed to feed the paper up to 3 m.
Keep the d button pressed to rewind the paper
up to 20 cm.
When the u button is used to rewind roll paper,
the paper will pause when the end of the roll
reaches the starting print position. Release the
button and then press it again to resume.

Screen View

15