Switching To Roll 1/Roll 2 By Document Size - Epson SureColor T-Series User Manual

Epson SureColor T-Series User's Guide
In this example, Plain Paper or Singleweight
Matte Paper is selected depending on the
purpose of its use.
Set Print Quality and other necessary settings,
5
and then print.
If a message The Media Type differs to the
setting on the printer. is appears, click Ignore.
Switching to Roll 1/Roll 2 by
Document Size
For example, when you use the following method
often, if you use the settings described below, the
printer can switch between Roll 1 and Roll 2
automatically in accordance with the document size of
the print job.
Usage example
You want to switch automatically to the roll paper with
the smaller margin automatically when printing
drawings of various sizes including A0, A1, A2, and A3.
In this example, the paper is loaded as follows. The
paper type is the same.
Roll 1: A2 width
Roll 2: A0 width
Settings on Windows
Using the control panel of the printer, confirm
1
Best Fit is set in Setup menu > Printer Setup >
Roll Paper Setup > Roll Switch Condition >
Paper Width.
More Ways to Print
The default Paper Width setting is Best Fit. If
the setting has not been changed, the setting is
Best Fit.
U"Setup menu" on page 139
Open the Printer Settings tab of the printer
2
driver and confirm that Source is Roll Auto -
XXXXX.
XXXXX indicates the width of the roll paper
currently in use.
If the setting is not Roll Auto - XXXXX, click it
and select Roll Auto - XXXXX.
For Paper Size, select the Paper Size set in the
3
application.
In this example, select A1 594 x 841 mm.
89