Epson SureColor T-Series User Manual page 17

Epson SureColor T-Series User Guide
1 Status indicators
: No error. The height of the
indicator changes with the level of
ink remaining.
: Ink is low. You need to prepare a
new ink cartridge.
: Ink cartridge is expended; replace
with a new ink cartridge.
: An error occurred. Check the
message on the screen, and clear
the error.
2 Ink color codes
C : Cyan
Y : Yellow
M : Magenta
M : Matte Black
K
P : Photo Black
K
- : The Maintenance Tab
Displays Ink Maintenance Tank status in the info
display area.
When you press the Menu button, the
Maintenance menu appears.
U"The Maintenance Menu" on page 138
The Info Display Area
As shown in the following illustrations, the icon
changes based on the status of the Ink
Maintenance Tank.
Normal
Introduction
Warning or error
1
17
1 Status indicators
: No error. The height of the
indicator corresponds to the
amount of space remaining.
: The Ink Maintenance Tank is
nearing the end of its service life.
You need to prepare a new Ink
Maintenance Tank.
: Ink Maintenance Tank is at the end
of its service life. Replace the Ink
Maintenance Tank with a new one.
/ : The Setup Tab
Shows the specified IP address in the info
display area.
When you press the Menu button, the Setup
menu appears.
U"Setup menu" on page 139
: The Large Copy Tab
This tab is displayed only when the optional
Multifunction Scanner is connected.
In this tab, select a job you want to do, and then
press the Z button. When the optional hard
disk unit or Adobe PostScript 3 Expansion Unit is
installed, you can also use the scan function.
U"Large Copying and Large Scanning using
the Multifunction Scanner (Option)" on page 71