The Maintenance Menu - Epson SureColor T-Series User Manual

Epson SureColor T-Series User's Guide

The Maintenance Menu

Item
Nozzle Check
Head Cleaning
Head Alignment Auto(Uni-D)
Auto(Bi-D)
Manual(Uni-D)
Manual(Bi-D)
Cutter Maintenance Adjust Cut Position
Replace Cutter
Using the Control Panel Menu
Description
Press the Z button to print a nozzle check pattern. Inspect the
pattern visually and perform head cleaning if you detect faint or
missing colors.
U"Checking for clogged nozzles" on page 156
Inspect the printed pattern and select the check boxes for patterns
with faint or missing areas. To select all nozzles, place a check in the
box on the left.
U"Cleaning the print head" on page 157
If print results are grainy or out of focus, perform head alignment to
realign the print head. If Auto is selected, the printer will scan the
printed pattern during printing and realign the head automatically.
If Manual is selected, a pattern will be printed; inspect the pattern
visually and enter the value you think appropriate.
U"Minimizing Print Misalignments (Head Alignment)" on page 158
-3 to 3 mm
Moves the cutter to the replacement position so it can be replaced.
Press the Z button to move the cutter to the replacement position.
The paper must be removed before the cutter can be replaced.
Remove the paper before proceeding.
page 163
138
You can fine tune the cut position when printing
to roll paper with no margins in all directions. The
cut position can be adjusted in increments of 0.2
mm.
U"Replacing the Cutter" on