Replacing The Cutter - Epson SureColor T-Series User Manual

Epson SureColor T-Series User's Guide
Place the used Ink Maintenance Tank in the
3
clear bag included with your new Ink
Maintenance Tank, and make sure that the
zipper is closed tight.
Install the new Ink Maintenance Tank.
4
Important:
c
Do not touch the IC chip on the Ink
Maintenance Tank.
Doing so may prevent normal operation and
printing.
Close the ink maintenance tank cover.
5

Replacing the Cutter

Replace the cutter when it is not cutting paper cleanly.
Supported cutter
U"Options and Consumable Products" on page 185
Use a cross-head screwdriver to replace the cutter.
Make sure you have a cross-head screwdriver with you
before replacing the cutter.
Maintenance
Important:
c
Take care not to damage the cutter blade.
Dropping it or knocking it against hard objects
may chip the blade.
Buttons that are used in the following settings
Remove any paper from the printer.
1
U"Removing Roll paper or Roll 1" on page 34
U"Removing Cut Sheets" on page 39
U"Removing Poster Board" on page 42
Confirm that the printer is ready to print. Press
2
the l/r buttons to highlight - and press the
Z button.
The Maintenance menu will be displayed.
Press the d/u buttons to select Cutter
3
Maintenance, and then press the Z button.
Press the d/u buttons to highlight Replace
4
Cutter and press the Z button.
The cutter will move to the replacement
5
position.
Remove the old cutter from the printer.
6
Loosen the screw holding the cutter in place
using a cross-head screwdriver and pull the
cutter straight out.
163