Trouble When The Optional Multifunction Scanner Is; Connected - Epson SureColor T-Series User Manual

Epson SureColor T-Series User's Guide
Head cleaning starts when the
printer is turned on.
When turned on after an extended period of disuse,
o
the printer may automatically perform head cleaning
to ensure print quality.
Head cleaning will end after about 10 to 15 minutes.
Trouble when the optional
Multifunction Scanner is

connected

The Large Copy/Large Scan tab does
not appear on the control panel
Is the power switch of Multifunction Scanner
o
off?
Flip the power switch of Multifunction Scanner to the
minus (-) side to switch on the power, and then turn
the printer off and then on again.
Is the AC adapter plugged into the electrical
o
outlet and the Multifunction Scanner?
After reconnecting the cable of the AC adapter, turn
the printer off and then on again.
Is the connection cable plugged in properly?
o
Confirm that the connection cable is securely
connected to the ports of the printer and the
Multifunction Scanner. Also, make sure the cable is
not broken.
Document width is not recognized
correctly
The rollers or glass surface of the
o
Multifunction Scanner may be soiled.
Turn off the printer and open the scanner cover, and
then clean the rollers and glass surface.
U"Cleaning the Multifunction Scanner (option)" on
page 166
If document width cannot be recognized correctly
after cleaning, open the Copy Settings menu, and
then set the width of the document under Width.
U"Large Copy / Large Scan menu" on page 153
Problem Solver
A document cannot be pulled out / A
document is jammed
Open the cover of the Multifunction Scanner, and then
remove the document.
The following procedure shows how to remove the
document.
Press the buttons on both sides of the cover to
1
release the locks.
When the locks are released, the cover opens
2
automatically, and you can remove the
document.
Black or white horizontal stripes or
uneven colors appear in
copied/scanned images
The rollers of the Multifunction Scanner may
o
be soiled.
Turn off the printer and open the scanner cover, and
then clean the rollers.
U"Cleaning the Multifunction Scanner (option)" on
page 166
182