Large Copying - Epson SureColor T-Series User Manual

Epson SureColor T-Series User's Guide
With the side of the document to be read facing
2
up, align the right edge of the document with the
loading guide.
Insert the document horizontally so that the
3
entire edge touches all inner rollers.
If the edge touches the roller, the document is
fed to the read start position automatically.
After automatic loading starts, release your
hand and do not obstruct the loading of the
document.
Copying and Scanning
After the document has been loaded, remove the
4
loading guide, and then make sure the left edge
of the document and the guide line are aligned.
If the document is copied or scanned with the
loading guide still attached, the edge of the
document may be damaged.
c
Note:
If the document is 1 m or longer, support it with
your hands so that it does not slant during
reading.

Large Copying

This section describes the procedure to copy on the
control panel of the printer.
Copies are printed along the following loading paths
depending on the model you are using.
O T7270/T5270/T3270
Loaded roll paper or cut sheet
75
Important:
If the document slants greatly from the
guide line, the slanted and protruding
section is not copied or scanned. Press the
r button to eject the document, and then
reload the document.