Roll Paper Jam - Epson SureColor T-Series User Manual

Epson SureColor T-Series User's Guide
Is the paper too thick or too thin?
o
Check that the paper specifications are compatible
with this printer. For information about the media
types and appropriate settings for printing on paper
from other manufacturers or when using RIP
software, see the documentation supplied with the
paper, or contact the dealer of the paper or the
manufacturer of the RIP.
Are you using the printer at normal room
o
temperature?
Epson special media should be used at normal room
temperature (temperature: 15 to 25°C, humidity: 40
to 60%).
Is paper jammed in the printer?
o
Open the printer cover of the printer and check that
there are no paper jams or foreign objects in the
printer. If paper is jammed, see "Paper jams" below
and clear the jammed paper.
Is the paper suction too strong?
o
If you continue to have problems with ejected paper,
try lowering the Paper Suction (the amount of
suction used to keep the paper on the paper feed
path). U"Paper menu" on page 134
Paper does not collect in the paper
basket or is creased or folded when
the paper basket is used.
Does the print job require a lot of ink, or is
o
the humidity of the workplace high?
Depending on the job and the work environment,
paper may not collect in the paper basket. Take the
following measures as appropriate.
Paper does not collect in the paper basket: Use
O
your hands to lightly press the paper into the
paper basket as it is ejected from the printer.
The paper folds after it has been cut
O
automatically: Select manual cutting and take
the paper in both hands after it is cut.
The paper creases and does not collect well in
O
the paper basket: Resume printing after closing
the paper basket. Before the paper ejected from
the printer touches the floor, take it in both
hands close to the paper eject guides and
continue to lightly support it until printing is
complete.
Problem Solver

Roll paper jam

To remove jammed paper, follow the steps below:
Caution:
!
If you opened the printer cover in operation, do
not touch the area as indicated by the warning
labels.
High temperatures may cause burns.
Turn off the printer.
1
Turn the printer on.
2
After a pause, the message Open printer cover
then tear off and remove jammed portion. will
appear in the display.
Open the printer cover and move the print head
3
away from the jam.
Important:
c
Other than when you are removing paper
jams, do not touch the print head. If you
touch the print head with your hand, static
electricity may cause a malfunction.
Cut the top portion of any torn or crinkled areas
4
using a commercially available cutter.
After removing the any torn or crinkled area,
5
press the Z button and close the printer cover.
Remove the cut paper.
6
179