Using The Control Panel; Attaching The Paper - Epson SureColor T-Series User Manual

Epson SureColor T-Series User's Guide
Important:
c
Confirm that the end of the roll is cut straight
across. The unit will not function as expected if
the end of the roll is wavy or curved.
U"Manual cut method" on page 33
Note:
For information on installing the auto take-up reel unit,
see the documentation supplied with the auto take-up
reel unit attachment.

Using the Control Panel

This section describes how to use the control panel for
the auto take-up reel unit.
A Power lamp
Displays the status of the auto take-up reel unit.
On : The auto take-up reel unit is
ready for use.
Flickering : The auto take-up reel unit is in
use.
Blinking : The auto take-up reel unit is in
power-saving mode.
Intermittent : An error has occurred.
blinking
Off : The power is off.
B Auto switch
Selects the auto take-up direction.
Backwar : The roll is taken up with the printable
d side in.
Basic Operations
B Auto switch
Forward
Off
C Manual switch
Selects the manual take-up direction.
The setting selected with the Manual switch takes
effect when the Auto switch is in the Off position.
Backwar
d
Forward

Attaching the Paper

This section describes how to attach roll paper to the
auto take-up reel unit roll core.
The procedure varies with the take-up direction.
Important:
c
Before proceeding, select Off for Auto Cut. Using
the auto take-up reel unit when On is selected will
cause errors.
U"Cutting the roll paper" on page 32
Taking Up the Paper Printable Side
Out
For information on installing the roll core, see the
Setup Guide for the optional auto take-up reel unit.
52
: The roll is taken up with the printable
side out.
: The auto take-up reel unit does not take
up paper.
: The roll is taken up with the printable
side in.
The speed will increase after the button
is pressed for more than three seconds.
: The roll is taken up with the printable
side out.
The speed will increase after the button
is pressed for more than three seconds.