Epson SureColor T-Series User's Guide
Slide the Roll 2 unit back into the printer.
8
Lift the adapter lock levers to release the roll
9
paper adapters.
Remove the roll paper adapters.
10
After rewinding the roll paper carefully, store it
in the original package.
Basic Operations
Loading and Removing
Cut Sheets
The procedure for loading and positioning cut sheets
varies with the thickness of the paper.
.003 to .03 inches (0.08 to 0.8 mm)
Sheets" on page 37
.03 to .06 inches (0.8 to 1.5 mm)
Board" on page 39
Important:
c
If the paper is wavy or curled, flatten the paper
before loading it in the printer, or use new paper.
If wavy or curled paper is loaded, this printer may
not be able to recognize the paper size, feed the
paper, or print correctly.
We recommend that you return the paper to its
original package and store it flat, and take it out
of the package just before you use it.
Loading Cut Sheets
Important:
c
Insert the paper just before printing. The pressure
rollers may leave impressions on paper that is left
in the printer.
Note:
The paper that can be used in the printer is detailed in
the following section.
U"Supported Media" on page 187
37
U"Loading Cut
U"Loading Poster