Mitsubishi Electric FR-F720-0.75K to 110K Instruction Manual page 333

(2) The following functions can be used with the inverter produced in June 2009 or later.
Check the serial number printed on the rating plate or on package.
Item
Added parameter setting values
Added parameters
Changed parameter setting ranges
324
Pr. 29 Acceleration/deceleration pattern selection setting value "6"
Pr. 30 Regenerative function selection setting value "10", "11", "20", "21"
Pr. 59 Remote function selection setting value "11 ", "12 ", "13 "
Pr.128 PID action selection setting value "110", "111", "120", "121"
Pr.167 Output current detection operation selection setting value "10", "11"
Pr. 178 to Pr. 189 Input terminal function selection setting value "70", "71", "72"
Pr. 190 to Pr. 196 Input terminal function selection setting value "48", "79", "85", "148",
"179", "185"
Pr. 261 Power failure stop selection setting value "21", "22"
Pr.522 Output stop frequency
Pr.553 PID deviation limit
Pr.554 PID signal operation selection
Pr.653 Speed smoothing control
Pr.654 Speed smoothing cutoff frequency
Pr.799 Pulse increment setting for output power
C42 (Pr.934) PID display bias coefficient
C43 (Pr.934) PID display bias analog value
C44 (Pr.935) PID display gain coefficient
C45 (Pr.935) PID display gain analog value
Pr.153 Zero current detection time setting range "0 to 1s" → "0 to 10s"
Changed Functions