Floating Extension - Panasonic KX-TDA30 Features Manual

2.3 System Data Control
2.3.7

Floating Extension

Description
Virtual extension numbers can be assigned to resources to make them appear as extensions.
These numbers are defined as floating extension numbers and can be assigned as a destination of
incoming calls etc.
This feature is also known as Floating Station.
Resource
Device
Group
Conditions
• It is possible to give names to floating extension numbers.
Programming Manual References
PC Programming Manual
2.8.8 [2-6-1] Numbering Plan—Main—Extension
2.9.10 [3-5-1] Incoming Call Distribution Group—Group Settings—Main
→ Floating Extension Number
→ Group Name
2.9.17 [3-7-2] VM(DPT) Group—Unit Settings—Floating Extension No.
2.9.20 [3-8-2] VM(DTMF) Group—Group Settings—Floating Ext. No.
2.9.22 [3-9] PS Ring Group—Floating Extension Number
430 Feature Guide
External Pager
Outgoing Message
(OGM)
Built-in Simplified
Voice Message
(SVM) (KX-TDA30
only)
Analogue Remote
Maintenance
ISDN Remote
Maintenance
Incoming Call
Distribution Group
PS Ring Group
VM (DPT) Group
VM (DTMF) Group
Description
Used as the destination for TAFAS feature. (→
1.17.3 Trunk Answer From Any Station (TAFAS))
Used to send messages for DISA feature. (→
1.17.6 Direct Inward System Access (DISA))
Used to access message boxes associated with
extensions. (→ 1.17.8 Built-in Simplified Voice
Message (SVM))
Used to access the PC programming mode
through a modem on a PC.
Used to access the PC programming mode
through the ISDN interface on a PC.
Used to call an incoming call distribution group. (→
1.2.2.1 Incoming Call Distribution Group
Features—SUMMARY)
Used to call a PS ring group. (→ 1.25.2 PS Ring
Group)
Used to call a VM (DPT) group.
Used to call a VM (DTMF) group.
Default
600
5 + two-digit
OGM number
SVM card 1:
591
SVM card 2:
592
599
699
6 + two-digit
group number
—
500 (VM [DPT]
Group 1)
—