Using System Speed Dial Numbers; Using Station Speed Dial Numbers - iPECS LIP-9010 User Manual

To place a call using Save Number Dial:
 Press the SPEED button,
 Dial #.
To store a number in the Save Number Dial:
 While on an outgoing external call, press the SAVE Soft button, or press
SPEED button twice.
4.3.3

Using System Speed Dial Numbers

The iPECS-UCP system has memory allocated for 12000 System Speed
Dial numbers (bins 20000-31999).
In some cases, these numbers are divided into groups called System
Speed Zone Groups.
In this case, you may access some numbers and not others and your
dialing restrictions may be invoked.
Only an Attendant can assign System Speed Dial numbers.
To place a call using System Speed Dial:
 Lift the handset,
 Press the SPEED button
 Dial the desired System Speed Dial bin number (20000-31999)
4.3.4

Using Station Speed Dial Numbers

The iPECS-UCP 100 Station Speed Dial numbers (bins 000-099). These
numbers are entered at the user's station and may include several 'special'
instructions.
Special instructions and the corresponding button are:
 PAUSE will momentarily stop dialing.
 FLASH as 1st digit - Activate dial tone detect.
 FLASH not as 1st digit - The system will generate a flash on the CO line.

MSG as 1st digit - Send digits as ISDN Keypad Facility message.
 '*' as 1st digit - Display Security, the stored number will not be
displayed when used.
 '*' not as 1st digit - Dial Pulse to Tone Switchover, the system will
switch from pulse to tone dialing.
LIP-9000 Series User Guide - ST 37