Table of Contents
Advertisement
LIP-7024LD
4.3
Using Automated Dialing
4.3.1 Using Last Number Redial (LNR)
The last number dialed on an external call is automatically saved in the
Last Number Redial (LNR) buffer.
Phone, the system will store the numbers dialed on the last ten calls.
OPERATION
To dial the Last Number for an external call:
•
Lift the handset,
•
Select the Redial Soft button,
•
Press
▼
•
Press the Send
NOTE—Press the Next Soft button to view the previously dialed
number.
4.3.2 Using and Entering Save Number Dial
You may store the last number dialed on an external call to the Save
Number Dial buffer for convenient dialing at a later time. The Save
Number is stored until you save new number.
OPERATION
To place a call using Save Number Dial:
•
Lift the handset,
•
Press the
•
Dial #.
To store a number in the Save Number Dial:
•
While on an outgoing external call, press
4.3.3 Using System Speed Dial Numbers
The iPECS-100 system has memory allocated for 800 System Speed
Dial numbers (bins 200-999).
have memory allocated for 3000 System Speed Dial numbers (bins
2000-4999).
frequently dialed numbers.
In some cases, these numbers are divided into groups called System
Speed Zone Groups. In this case, you may access some numbers
and not others and your dialing restrictions may be invoked.
Only an Attendant can assign System Speed Dial numbers.
OPERATION
to select from the last 10 numbers dialed,
▲
VOLUME
Soft button or
button,
SPEED
You may, if allowed, use System Speed Dial to call
For users of an iPECS Display
.
/
HOLD
SAVE
SPEED
The iPECS-300 & 600 systems each
２２
User Guide
twice.
Advertisement
Table of Contents
