System Dect Components & Specifications - iPECS eMG80 Installation Manual

iPECS eMG80
System DECT Installation Guide
2. S
YSTEM
S
PECIFICATIONS
The System DECT solution works well with iPECS eMG80 System which is comprised of WTIB4,
Base Station (RPF), and DECT terminal. The next figure shows a general DECT reference model
of Wireless Office Terminal System (WOTS).
Figure 2.1 General DECT reference model of Wireless Office Terminal System

PABX – Private Automatic Branch Exchange

RFP – Radio Fixed Part (Base Station)

PSTN – Public Switched Telephone Network
The following is needed to configure the System using DECT phones:

WTIB4 board –One WTIB4 can be connected to the iPECS eMG80 System. WTIB4
can support up to four Base Stations.

Base Station (GDC-600BE) – The Base Station can process up to six simultaneous
calls. The Base Station should be installed indoors and protected from surge because
it is designed for indoor station.

Wireless Terminal (GDC-450H/480H/500H) – Up to 48 wireless terminals can be
registered.
DECT C
OMPONENTS
2
Issue 1.3
&