Using And Entering Saved Number Dial; Using System Speed Dial Numbers; Using Station Speed Dial Numbers - iPECS LIP-9002 User Manual

 Dial *,
 Press the VOLSS buttons to select from the last 15 numbers dialed,
 Press the HOLD (SAVE) button.
4.3.2

Using and Entering Saved Number Dial

You may store the last number dialed on an external call to the Saved
Number Dial buffer for convenient dialing later. The Saved number, which
can be up to 24 digits, is stored until a new number is saved.
To place a call using Save Number Dial:
 Press the SPEED button,
 Dial #.
To store a number in the Save Number Dial:
 While on an outgoing external call, press the SPEED button twice.
4.3.3

Using System Speed Dial Numbers

The iPECS system has memory allocated for System Speed Dial numbers.
These numbers are divided into groups called System Speed Zone
Groups. In this case, you may access some numbers and not others and
your dialing restrictions may be invoked.
Only an Attendant can assign System Speed Dial numbers.
To place a call using System Speed Dial:
 Lift the handset,
 Press the SPEED button
 Dial the desired System Speed Dial bin number. Bin numbers should be
available from your iPECS system administrator.
4.3.4

Using Station Speed Dial Numbers

The iPECS system provides Station Speed Dial memory for telephone
numbers you commonly dial. The number of entries (bins) in this Private
Directory may vary but is typically 100 can be accessed with bin numbers
(000 – 099). Contact your iPECS system administrator for details. These
Speed Dial numbers, which are entered at your station, may include several
'special' instructions.
Special instructions and the corresponding button are:
 PAUSE will momentarily stop dialing.
26 LIP-9002 User Guide - ST