Brake Hose Inspection - Yamaha XVS650 Service Manual

3 - 27
EB304060
BRAKE HOSE INSPECTION
1.lnspect:
• Brake hose(s)
Cracks/wear/damage
-7
Replace.
2.Check:
• Brake hose clamp(s)
Loose
-7
Tighten.
3.Hold the motorcycle upright and apply
the front or rear brake.
4.Check:
• Brake hose(s)
Activate the brake lever several times.
Brake fluid leakage
-7
Replace the faulty
hose.
Refer to "FRONT BRAKE" in CHAPTER 6.
EB304070
AIR BLEEDING (HYDRAULIC BRAKE
SYSTEM)
A
WARNING
Bleed the brake system whenever:
• the system is disassembled
• a brake hose is loosened or removed
• the brake fluid level is very low
• brake operation is faulty
If the brake system is not properly bled, a
loss of braking performance may occur.
1.Bleed:
• Brake system
**********************************
Air bleeding steps:
a.Fill the reservoir with the proper brake
fluid.
b.lnstall the diaphragm. Be careful not to
spill any fluid or allow the reservoir to
overflow.
c.Connect a clear plastic hose
CD
tightly to
the caliper bleed screw
®.
d.Place the other end of the hose into a con-
tainer.
e.Slowly apply the brake lever several
times.
f. Pull the lever in. Hold the lever in position.