Middle Driven Pinion Gear Installation - Yamaha XVS650 Service Manual

MIDDLE GEAR
ENG
MIDDLE DRIVEN PINION GEAR
INSTALLATION
1.1nstall:
• Spring retainers
NOTE: _
Attach the damper spring compressor
CD
on
the spring seat
®
and compress the
damper spring, then install the spring
retainers.
. Damper spring compressor:
YM·33286, 90890·04090
2.1nstall:
• Bearing
**********************************
. .
4
300-007
Installation steps:
.Install the new bearing by reversing the
removal steps.
NOTE:
Use a socket
CD
that matches the diameter
of the outer bearing race and the oil seal.
Do not contact the bearing center race
®
or balls @. Contact should be made only
with the outer race @.
**********************************
3.lnstall:
• Bearing retainer
CD
**********************************
Install steps:
• Attach the folded rag
®.
• Secure the bearing'housing edge in the vise.
. • Attach the bearing retainer wrench @.
Bearing retainer wrench:
YM-04057, 90890-04057
• Tighten the bearing retainer.
The middle driven shaft bearing retainer
has left-handed threads. To tighten the
retainer turn it counterclockwise.
'. Bearing retainer:
110 Nm (11.0 m • kg, 79.6 ft ·Ib)
**********************************
4 -75