Yamaha XVS650 Service Manual page 127

ROCKER ARMS AND CAMSHAFT
I
ENG
I'\.1
NOTE:
~
_
• The dowel pin
®
on the end of the cam-
shaft must align with the timing mark (6)
on the cylinder head.
• Make sure that the No.1 camshaft
®
is
installed in the rear cylinder head and the
NO.2 camshaft (J) is installed in the front
cylinder head.
3.Apply:
• Engine oil
(onto the rocker arm shafts)
4.1nstall:
• Rocker arms
CD
• Rocker arm shafts (intake and exhaust)
®
NOTE: _
• The thread hole
®
of the rocker arm
shafts must face to the outside.
• After installation, make sure that the
thread hole
®
of the rocker arm shaft is
positioned correctly, as shown in the illus-
tration.
4 - 20