Yamaha XVS650 Service Manual page 266

~~~~~~~~~~~~SH_A_R~DR_W_E_ICHA3~1
Therefore, the ring gear shim thickness is
0.55 mm (0.02 in). Shim sizes are supplied
in the following th ickness.
Ring gear shim
Thickness (mm) 0.25, 0.30, 0.40
Since ring gear shims can only be selected
in 0.10 mm (0.003 in) increments, round off
the hundredths digit and select the appro-
priate shim(s).
Hundredths
Rounded value
0, 1,2,3,4
0
5,6, 7, 8, 9
10
**********************************
2.1nstall:
• Shims (proper size as calculated)
• Fina I drive shaft assembly
• Bearing retainer (final drive shaft)
~115
Nm (11.5 m· kg, 83.2 ft ·Ib)
I
Use a bearing retainer wrench.
The final drive shaft bearing retainer has
left-hand threads. Turn the retainer coun-
terclockwise to tighten it.
'. Bearing retainer wrench:
YM-04050,90890-04050
3.Adjust:
• Gear backlash
Refer to "FINAL GEAR BACKLASH MEA-
SUREMENT" and "FINAL GEAR BACK-
LASH ADJUSTMENT".
4. Measu re/select:
• Ring gear thrust washer clearance
6 - 65