Yamaha XVS650 Service Manual page 339

[Q] Fasten the sidestand switch lead with a metal
clamp~
[fJ Connect the rear brake switch coupler in front
of the roll over valve. stay.
{Q}lnstall' the plastic . locking tie immediately
. below the'cable guide bracket.
l]] Pass the speedometer .cable through the
speedometer cable holder.
[ID To the rectifier/regulator.
lJ:] Pass the rear brake switch lead between the
frame and rectifier/regulator. Do not pinch the
rear brake switch lead.
CABLE ROUTING
ISPECI
U-I
[Q1 Fasten the rear brake switch lead with a plastic
locking tie.
[2] To the speedometer light leads.
~
Pass the fuel tank breather hose and vacuum
chamber air vent hose through the holder.
00
Pass the speedometer cable through the
holder.
IYl
Place the couplers behind the steering head.
o
=
B
-
oo-\~
~
=======
-6-