Master Cylinder Assembly; Master Cylinder Installation - Yamaha XVS650 Service Manual

FRONT BRAKE
ICHASI~I
2.lnstall:
• Circtip
CD _
• Dust boot
®
MASTER CYLINDER INSTALLATION
1.lnstall:
• Master cylinder
CD
• Master cylinder bracket
®
r:il1":"'10~N=:-='m~(1~.0~m-.-:-kg-,~7""'.!::.2""ft-.-:-=lb~)""'"
• Install the master cylinder holder with the
"UP" mark facing upward.
• Align the end of the holder with the
punch mark
®
on the handlebar.
• First, tighten the upper bolt, then tighten
the lower bolt.
2.1nstall:
• Copper washers
CD _
• Brake hose
®
• Union bolt @
~30 Nm (3.0 m . kg, 21.7 ft . Ibl
I
NOTE: _
• Tighten the union bolt while holding the
brake hose as shown.
• Turn the handlebar to the left and to the
right to check that the brake hose does
not touch other parts (throttle cable, wire
harness, leads, etc.). Correct if necessary.
A
WARNING
• Proper brake hose routing is essential to
insure safe motorcycle operation. Refer
to "CABLE ROUTING".
• Always use new copper washers.
6 - 14