Crankshaft Installation - Yamaha XVS650 Service Manual

Plane bearing installer/remover:
YM-28898, 90890-04074
Middle driven shaft bearing driver:
YM-04058,90890-04058
NOTE: _
Align the projection
®
on the bearing with
the slit
(6)
on the crankcase.
2.lnstall:
• Main journal bearings
CD
NOTE: _
• Attach the main journal bearing to the
plane bearing installer/remover
®
middle
driven shaft bearing driver @.
• Align the projection
®
on the bearing
with the projection
(6)
and stat
©
on the
special tools.
3
CRANKSHAFT AND CONNECTING RODS
ENG
ti).
CRANKSHAFT INSTALLATION
1.Attach:
• Main journal bearings
CD
I
~:
3.lnstall:
• Connecting rod bearings
CD
NOTE: _
• Align the projection
®
of the bearings
with the notches
(6)
in the connecting rod
cap.
• Install each bearing in its original place.
309..()()6
4.lnstall:
• Connecting rods
CD
NOTE: _
• The stamped "y" mark
®
on the connect-
ing rods should face outward of the crank~
case.
• Install each connecting rod in its original
place.
4 - 62